The VDT-12 hot nozzle is a component for a hot runner system consisting of a heater, a hot nozzle and a thermocouple. This hot nozzle is made of stainless steel material, has excellent corrosion resistance, high temperature resistance, and can work stably under high temperature and high pressure conditions

Open hot nozzle is a heating component used in hot runner molds, usually composed of needle valves, heaters, sensors and other components. Needle valves can control the flow of liquid, heaters can heat liquid, and sensors can detect liquid temperature

1 out of 16 hot runner is a hot runner system, which applies hot runner technology to injection molding, so that the plastic can maintain a molten state during injection molding. Specifically, 1 out of 16 hot runner means that in an injection mold, there is a main hot runner, from the main hot runner branch out of 16 dispensing mouth

Valve needle hot runner, good color change performance, suitable for most plastics, good flow performance, very fine gate marks. Valve gate hot runner system plastic mold structure is the most complex. It has the same structure as the common multi-head hot runner system plastic mold

Hot runner mold has been successfully used for processing various plastic materials. Such as PP, PE, PS, ABS, PBT, PA, PSU, PC, POM, LCP, PVC, PET, PMMA, PEI, ABS/PC and so on. Any plastic material that can be machined with a cold runner mold can be machined with a hot runner mold

1, shorten the forming cycle of the parts because there is no limitation of the cooling time of the runner system, the parts can be ejecting in time after forming and curing. Many thin-wall parts produced with hot runner molds can be formed in less than 5 seconds in a pure hot runner mold because there is no cold runner, so there is no production cost. This is particularly significant